GPLshift+ v0.7.5.0 Out

[JSJ]

With Support for Fanatec Porsche 911 Turbo Wheel's Buttons
and Shifter

www.gplshift.dk


Best
JSJ

[Rodolfo]

Hi JSJ,

your work is so good as always. Thank you very much. And....
...your english is very good - even better than mines
Rolf

[mariopires]

Thanks for this great utility.

I'm with a problem with Porsche Fanatec Wheel and GPLShift:
I'm not using the clutch device and I shift only with the 2 rear buttons (12 and 11 numbers with the gplshift counting system).
I have done this:

;-------------------------------------------------
[ Clutch Device ]--------------------------------------------------------------
Clutch_Threshold = 0 ;OPTIONS: 0 5 6 7 8 9 ;EFFECT:
;a number from 5 to 9 for enable this function:
;0 = OFF 5 = 50% 6 = 60% 7 = 70% 8 = 80%
;9 = 90%
;This means how much you have to press the Clutch
;pedal down to allow a GPL gearshift with your AL
;compatible Shifter unit

but I can't shift with the 2 rear buttons (pressed don't respond).
All the other functions are OK.
What I'm doing wrong?

[Bob_Simpson]

You might try unplugging other game controllers if you have any others attached to your computer. Next try a different USB port.

For more controllers, you can set the line in GPLShift:


[ GPL AXES ]
Share_All_16_AXES = 1

[mariopires]

Thanks Bob for your advice. The problem continues. I have only one controller, de Porsche Wheel in is basic configuration. Without mounting the gear sticks and using the 2 rear levers.
I tried the others USB port without sucess. In the others sims and with gplshift previous version, all the buttons works. This is a great mystery to me.
I have re-download the files to prevent possible corruption of files but still without results. The 2 rear buttons respond when doing the atribution in the menu of gpl-controllers but don't respond when "in game". Please help me because without this only a few buttons of the Porsche Wheel can be used in GPL.

[JSJ]

Thanks Rodolfo, mariopires

To be sure:
You can't use both a Shifter and the Wheel button for GPL gear
shift in same time you have to choose one of the methods

If you prefer using ex the rear buttons then you have to set the AUTOmatic support off:
[Shifter Unit ]
Shifter_Model = NONE

Then it should work, I thing,

BTW: Why not use the Porsche Shifter, problems?


Sorry for my bad English
JSJ

[mariopires]

Thanks JSJ. It works .
I hope that switching from AUTO to NONE no other functions dedicated to Porsche wheel are also deactivated. My bad knowledge of the language don't let me always understand exactly what people writes.
I don't use shifter because I become even more slower in GPL than usual .
Thanks a lot for you support and for this great utility.
Mário

l