|
|
Post by JSJ on Jul 17, 2009 16:58:47 GMT 1
With Improvement of the Matrox's TripleHead2Go support in GPL (inCarView Mode) Fixed some Bugs Added: July 19: Released Button bug fix 0.771 You don't need to Update from 0.770 to 0.771 if you don't have problems with using Buttons (1 - 16) If you have any problems with GPLshift, then Please let me know, here JSJ www.gplshift.dk |
|
|
|
Post by Rodolfo on Jul 19, 2009 17:26:51 GMT 1
Thank you again for this great tool,
Rolf
|
|
|
|
Post by ricknau on Jul 26, 2009 22:12:27 GMT 1
Yes yes! What a great tool! Thanks JSJ! Well I gave it a workout. I'm as happy as can be but if you want feedback here goes. Race mode: The only thing I'd tweak in the race mode is the position of the pit board. See this link- img200.imageshack.us/img200/762/771pitboard.jpgIt's totally usable as is and a vast improvement but if the driver sits low in the c0ckpit the numbers get cut off just a bit. And I like the zoom feature in race mode. Seems to go way beyond the old 86deg limit. In fact it goes way beyond the 130deg limit of GEM+. It looks to me like that is how you got the mirrors into the middle monitor as opposed to moving the driver's position back. I like it because I had always wanted to get just a few more degrees of view but couldn't. Now a simple arrow press fixes both. Playback mode: The c0ckpit view is much improved. Can Zoom the FOV easily just like in race mode. But I was not able to change the driver's position as in race mode. Not a big deal when just watching a replay. Edit: Here I am correcting a comment I made about the "F10" view not working. Stupid me! I was trying to use the F10 key instead of choosing that view using the "button" in the replay screen. Doh! Oh yeah, this link shows the new default view for a 67 Brab. img161.imageshack.us/img161/9433/771default3screens.jpgThought you might just want to see it on a 5040x 1050 setup. Edit: added this -- As you can see I overlap my monitors to reduce the bezel width. And the digital TH2G has a setting where you can move the outer scenes inward as if they are "behind" the bezel. I normally use this feature but did not use it here so JSJ could see the total picture. All in all great work JSJ! We all owe you big time. Do you have a Paypal account? Edit: Never mind, I see it at www.gplshift.dk/Edit: I think I have figured out that using "Home" to save a setup only saves the Zoom (FOV) setting. It would be nice if it saved height and front/back position too. |
|
